Handheld Electric Power Concrete Vibrator Cement Copper Shaft Rod 1300W 4000 RPM

Description

Handheld Electric Power Concrete Vibrator Cement Copper Shaft Rod 1300W 4000 RPM
Handheld Electric Power Concrete Vibrator Cement Copper Shaft Rod 1300W 4000 rpm
Description
A concrete vibrator is an indispensable tool in engineering construction, which can make the concrete more solid and the surface flatter. Our vibrator is made of high-quality aluminum which is not easy to rust, so you can use it for a long time. The high efficiency and high amplitude pure copper motor can greatly improve your work efficiency, and is an excellent assistant for your work.
Key Features
High-end Material:
The shell of the vibrator is made of aluminum, equipped with alloy gear and an iron galvanized rod head, which is
wear-resistant
and
corrosion-resistant
, and is not easy to rust. Therefore, you can use it for a long time without frequent replacement.
Large Work Area:
The 2m/6.6ft length of this vibrator is convenient for you to work in a big area, and finish different projects. Moreover, with the long power cord, you don't have to worry about an outlet being too far away.
Exquisite Workmanship:
The vibrator adopts plastic spraying technology to make the surface more smooth, the color more beautiful, and more textured.
High Working Efficiency:
The product is equipped with a 1300w pure copper motor, which can rotate at 4000 rpm. While reducing noise, it can also quickly solidify cement and remove all trapped bubbles, and increases the density of the concrete.
Good Heat Dissipation:
There are multiple heat dissipation holes on the rear of the vibrator, which can timely reduce the temperature of the motor during operation, prevent burns, and extend the service life of the motor.
Large Amplitude:
The vibrating rod is made of a 40mm/ 1.57inch manganese steel strip and double steel wire braided hose, which is not easy to break, and is solid and durable. The head of the vibrating rod is quenched, with high hardness and amplitude of 1.1mm/0.04inch. So you don't have to wait for a long time.
Easy to Use:
The product does not need to be installed. You only need to connect the vibrating rod to the body, without redundant steps to save your energy.
Compact and Lightweight:
The size of this vibrator is 5*3.5*5.9inch, and its net weight is 8kg/17.64lbs, so it's easy and comfortable for to use it. In addition, you can easily put it in your studio or storage room for storage.
Worry-free
Service:
We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our products. Please contact us in time.
Details
Handle:
The handle made of Nylon conforms to the ergonomic design, allowing you to grasp it more comfortably and reduce the burden on your hands.
Interlocking Switch:
The handle is equipped with a self-locking switch, which can make the machine operate for a long time and reduce hand fatigue.
Application
The product can be widely used in repair, construction, concrete column, grape trellis pouring, highways, fences, bridges, etc.
How to Use
Take out the shaft and mot
or.
Insert the shaft of the motor into the connected shaft.
Tighten it according to the direction of the thread.
knock the vibrating bar on the ground several times.
How to Maintain
The brushes should be checked periodically and warm-out brushes should be replaced in time, after replacing, inspect, whether the new brushes
can move freely in the brush holder, and keep running the motor for 15 minutes to match the contact of brushes and commentators.
Keep the ventilation slots clear from dirt and clean off the accumulated dust and oil dirt periodically.
During normal operation, if anything happens, the power supply should be cut off at once and the tool should be checked and repaired.
Regularly inspect all mounting screws and ensure that they are properly tightened, should any of the screws be loosened. Tighten them immediately, failure to do so could result in personal injury.
Do not stop the vibrator motor while the rod head is immersed as withdrawing will be difficult.
Do not leave the vibrating rod head  operating in the air as it will be overheated. The road head
is
only effectively cooled when it is immersed in the concrete.
Hold the road head by the rubber sleeve that is wrapped around it in case excessive bending of
th
e flexible tube occurs. Excess bend causes friction and makes the flexible tube more likely to
o
verheat. Therefore, always keep the flexible tube as straight as possible when operating.
Specification
Color: Slivery, Red
Surface Treatment: Plastic Spraying
Material of Shell: Aluminum
Material of Handle: Nylon
Material of Gear: Alloy
Material of Rod Head: Iron Galvanized
Plug Type: US Standard
Voltage: 110v
Power: 1300W
Speed: 4000 rpm
Rod length: 6.6 Ft/ 2m
Head Diameter: 1.4inch
Amplitude: 1.1mm/0.04inch
Max. Swing: 0.55mm/0.02inch
Motor Size: 32.8 * 8.8 * 15cm/5 * 3.5 * 5.9inch
Vibrating Rod Length: 200cm/78.9inch
Rod Head Length: 45cm/17.7inch,
Rod Head Diameter: 3.5cm/2inch
Nut Height: 4cm/2inch
Vibration: 14400 VPM
Net Weight: 8kg/17.64lbs
Gross Weight: 8.2kg/18.08lbs
Package Size: 68*45*10cm/26.77*17.72*3.84inch
Package Included
1*
Concrete Vibrator
1*
Copper Shaft Rod
Notes
After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation.
When the concrete vibrator works, the concrete vibrator should be inserted into the concrete vertically or at an angle, after vibrating for a certain period of time, the concrete vibrator should be pumped up and down when vibrating.
The vibrating rod should not be bent more than 50mm/1,97inch.
After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating up too much and damaging the machine parts.
After using it for a period of time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating into the rod, causing the vibrating rod not to vibrate.
Do not use power tools in a damp or wet location, keep the work area well lit do not use power tools where there is a risk to cause fire or explosion.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Brand
Unbranded
MPN
Does not apply
Type
Concrete Vibrator
Color
Slivery, Red
Surface Treatment
Plastic Spraying
Material of Shell
Aluminum
Material of Handle
Nylon
Material of Gear
Alloy
Material of Rod Head
Iron Galvanized
Plug Type
US Standard
Voltage
110v
Power
1300W
Speed
4000 rpm
Rod length
6.6 Ft/ 2m
Head Diameter
1.4inch
Amplitude
1.1mm/0.04inch
Max. Swing
0.55mm/0.02inch
Motor Size
32.8 * 8.8 * 15cm/5 * 3.5 * 5.9inch
Vibrating Rod Length
200cm/78.9inch
Rod Head Length
45cm/17.7inch
Rod Head Diameter
3.5cm/2inch
Nut Height
4cm/2inch
Vibration
14400 VPM
Net Weight
8kg/17.64lbs
Gross Weight
8.2kg/18.08lbs
Package Size
68*45*10cm/26.77*17.72*3.84inch
On Oct 25, 2022 at 19:11:10 PDT, seller added the following information: